HDMI 1.4 Switches/Splitters/Extenders

Quest HDMI 1X2 Splitter, 4K2K, HDCP1.4

Quest offers HDMI 1 X 2 and 1 X 4 Splitters with speeds of up to 10.2 Gbps.

Quest offers a HDMI Extender that allows you extend HDMI

The HDMI™ Extender lets you extend HDMI™ audio/video signal by up to 60 meters (196 feet) over single CAT6 cable. The extender kit includes both the local transmitter and remote receiver units, perfect for point‐to‐point digital signage applications that require
high quality HDMI™ video. It also works to extend Infrared IR signals from remote controls, ideal for controlling your video source from your video destination. For perfect performance, the extender comes with a reset function on the receiver, which enables user to adjust the signal to best match the cable length.

Quest HDMI 1X4 Splitter, 4K2K, HDCP1.4

Quest offers HDMI 1 X 2 and 1 X 4 Splitters with speeds of up to 10.2 Gbps.

The PureLink UHD-120 1x2 Ultra HD/4K HDMI Distribution Amplifier splits an HDMI signal to send it simultaneously to two separate displays. It supports resolutions up to 1080p and 4Kx2K Ultra HD and is HDCP compliant. Built-in equalization and reclocking ensure optimal signal quality.

Quest HDMI Repeater, 35M, 4K X 2K

Quest offers a HDMI Repeaters that boost the A/V signals via HDMI cable up to 35 meters (115ft) at 4K2K@30Hz.

The PureLink AV HCE II Tx 4K HDMI over HDBaseT Transmitter is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

The PureLink HDS-21RS 2x1 HDMI Switcher with Scaling enables an easy way to switch between two different HDMI sources connected to a single display. It features PIP multi-view display technology and supports RS-232, IR and front panel control.

The PureLink AV HCE II Rx 4K HDMI over HDBaseT Receiver is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50-foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

Tired of being restricted by HDMI distance limitations in complex setups? Say goodbye to that frustration with the VIP-100 II HDMI over IP distribution system from PureLink AV. This transmitter can be combined with a compatible receiver to transmit over distances up to 364 feet, or 120 meters.

Get audio/video, RS-232 and IR extension coupled with matrix switching capability up to a 64x190 system to meet the needs of even the most complex and demanding setup. Point-to-many and many-to-point are also supported.

Using HDBaseT technology, the ZIG-HVX-70R from ZIGEN extends an HDMI signal up to 70 meters using a single Ethernet cable. It also transmits bidirectional control signals for ultimate convenience. It can be used as a stand alone solution or combined with matrix switch setups to extend the input or output cable distance.

This HDMI extender supports resolutions up to 1080p and 4Kx2K Ultra HD. It supports simultaneous transmission of RS-232 and IR signals from a control system, enabling remote control of source devices or displays.

HDMI® POE Receiver

The Evolution by Vanco EVRX2006 HDMI Receiver over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and PoE receives high definition video and audio signals, IR, and power at a distance of up to 164ft/50m over a single Cat5e/6 cable. Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing the Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the unit automatically adjusts for compatibility and gain. This receiver also features a newly redesigned slim and compact chassis for easy and flexible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats, and is HDCP compliant. In addition, bi-directional IR pass-through allows for source or display control. The EVRX2006 works with Evolution Series Splitters, Matrix Selector Switches and Extender Transmitters over Cat5e/Cat6 that have POE functionality.

Tech Support Tips:

• With recent changes to many new source and display components, we have updated the EVSP1013, EVSP1017, and EVRX2006 to improve compatibility. There are now “2nd Generation” versions of each of these products for improved compatibility

• Ensure that both the splitter(s) (EVSP1013 and EVSP1017) and receiver(s) (EVRX2006) match generation versions. For example, if using a “2nd Generation” splitter, a “2nd Generation” EVRX2006 receiver must be used. All “2nd Generation” Products are marked as such on the product and box. If no version or version number is listed, this would be a “1st Generation” unit

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

The PureLink AV HTX-RX is a receiver only, designed to work with the HTX-4400-U and HTX-8800-U HDMI matrix switchers. It receives Ultra HD/4KHDMI v1.4b uncompressed video and audio up to 10.2 Gbps up to 330 feet (100 meters) away. It supports HD multichannel audio including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz), bi-directional IR and RS-232.

This compact, yet innovative solution from Ethereal Home Theater lets you upgrade older passive 24AWG HDMI cables to 18 Gbps bandwidth capabilities. It's a simple plug and play adapter, powered by a single Micro USB cable that can be plugged into an available USB port on the display. It is designed to be mounted at the display side. It features a transmission distance of up to 15 meters. The DDC data integrity circuitry solves EDID low speed data issues. It exceeds HDMI 2.0a standards, supporting 4K/60, 4:4:4 and HDR video.

The PureLink AV HCE II Tx/Rx 4K HDMI over HDBaseT Extension System is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

HDMI Extender Over Cat5e/6 Cable with IR and HDMI Loop-Out

The HDEX60 by Vanco extends 1080p high-definition video, audio, IR, and power up to 196ft (60m). Power over Ethernet (PoE) technology transmits power over Cat5e/6 cabling to either the transmitter or receiver unit without the need for a power supply. No EDID or EQ changes are necessary as the units automatically adjusts with dynamic EDID management. HDMI loop-out is built into the transmitter for connecting additional local displays, AVR, or other system components. IR pass-through also allows for source control from the display location.

HDMI® 1×3 Splitter over Cat5e/Cat6 Cable

The Evolution EVSP1013 is a HDMI splitter that allows for 1 HDMI input to be split and sent to 4 different displays. The 3-UTP output ports can connect to the EVRX2006 POE receiver (sold Separately) over Cat5e/6 cable to transmit 1080p60 video with audio and control up to 50m. The single HDMI output can be used for a local display or cascaded into another splitter for an even larger distribution system. It supports 20k - 60K wideband bi-direction IR communication and dynamic or manual EDID management. The user can manually select the best compatible EDID or automatically blend EDID of 4 connected HDMI sinks. It also provides power over the Cat5e/6 so that the EVRX2006 do not require a power supply.

Compatible Receiver: EVRX2006 

Tech Support Tips:

• With recent changes to many new source and display components, we have updated the EVSP1013, EVSP1017, and EVRX2006 to improve compatibility. There are now “2nd Generation” versions of each of these products for improved compatibility

• Ensure that both the splitter(s) (EVSP1013 and EVSP1017) and receiver(s) (EVRX2006) match generation versions. For example, if using a “2nd Generation” splitter, a “2nd Generation” EVRX2006 receiver must be used. All “2nd Generation” Products are marked as such on the product and box. If no version or version number is listed, this would be a “1st Generation” unit

Evolution HDMI Over Single Coax Extender With IR

The Evolution by Vanco EVEX2004 HDMI Extender over Single Coax with Bi-directional IR extends high-definition video and audio signals and IR, at a distance of up to 394ft/120m over RG6 coaxial cable, and 164ft/50m over RG59 coaxial cable. Features Bi-directional IR, which allows for control of the source or display. Also features EDID management, which allows and encourages source and display “handshake” for seamless integration. With just a single coaxial cable, high-definition sources with HDMI outputs can be connected to high-definition displays with HDMI inputs over long distances. DTS-HD or Dolby TrueHD audio, and HDCP are supported and compatible with the EVEX2004. Compact design with mounting ears included, for an easy and flexible installation. A great solution for applications that already have an existing coaxial cable in place.

The EVEX2004 includes two units: the transmitting unit (EVEX2004-TX) and receiving unit (EVEX2004- RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The EVEX2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long-distance capability and provides a solution in applications where additional cables cannot be installed. 

Metra 1 X 4 HDMI® Splitter Extender

Supporting 1080P over category cable, the Metra Home Theater CS-1X4HDSPLEXT is a great way to share ah HDMI based source to 4 displays with category cable wiring.

Metra 1x16 HDMI® Splitter

Supporting the HDCP 2.2 and 4K distribution needs of the large residential and commercial HDMI installations, the CS-1X16HDMSPL handle any Consumer Electronic Source Bandwidth up to and including 10 Gbps. LED indicators let you know that there is communication between the CS-1X16HDMSPL3 and the display.

Designed to simplify and automate installation and monitoring of the VIP Series of transmitters and receivers from PureLink AV, this VPX IP Management Software enables automatic device recognition, advanced diagnostics, presets and excution schedules, and can automatically build the I/O device map or allow manual creation and editing. With a browser interface, you can enjoy convenience and easy access to the network via mobile devices like tablets.

The UX line of HDMI matrix switchers from PureLink AV allows you to incorporate all the latest HD technology into your setep. The UX-8800 supports High Dynamic Range (HDR) video, resolutions up to 4Kx2K @ 50/60 Hz, and is HDCP 2.2 compliant. This innovative switcher allows you to toggle between eight different sources on eight separate displays or TVs. It's ideal for installations in retail establishments, conference rooms, classrooms, and hospitality environments.

This signal distribution unit features a built-in web interface for setup and operation that is compatible with any standard browser, so it can be accessed via tablet or laptop with ease. The locking HDMI ports ensure cables stay securely in place and aren't dislodged during operation. Bi-directional RS232 and LAN control promotes seamless remote access.

The UX line of HDMI matrix switchers from PureLink AV allows you to incorporate all the latest HD technology into your setep. The UX-4400 supports High Dynamic Range (HDR) video, resolutions up to 4Kx2K @ 50/60 Hz, and is HDCP 2.2 compliant. This innovative switcher allows you to toggle between four different sources on four separate displays or TVs. It's ideal for installations in retail establishments, conference rooms, classrooms, and hospitality environments.

This signal distribution unit features a built-in web interface for setup and operation that is compatible with any standard browser, so it can be accessed via tablet or laptop with ease. The locking HDMI ports ensure cables stay securely in place and aren't dislodged during operation. Bi-directional RS232 and LAN control promotes seamless remote access.

Praised by system integrators as the most reliable in the industry, the PureLink HX-4400-U 4x4 HDMI Integrated Matrix Switcher offers switching for up to 4 inputs and 4 outputs. Built-in EDID/HDCP management and full HDCP and HDMI v1.4 compatibility combine to deliver unparalleled quality and value.

The PureLink PS-6200 6x2 Presentation Switcher with 2x2 Built-in Audio Matrix is designed for simple conferencing environments and provides seamless switching between digital and analog input sources.

The PureLink AV HCE Tx/Rx is the HDMI over Cat5/Cat6 extension system designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable.

With built-in EDID management and independent HDCP, you can expect fast, reliable connections. The LCD displays the current resolution, so there's no guesswork when it comes to configuring your install.

The PureLink ICR100 HDBaseT Extension System with iCON Control Automation provides HDBaseT signal transmission up to 330 feet. It supports resolutions up to Ultra HD or 4Kx2k. Priority auto-switching between inputs allows the user to safeguard source content on screen, while power on/off display control via iCON automation ensures the modules are safely powered off when a source device is turned off or removed.

This kit includes both the transmitter and receiver for a complete solution. The ICR100 boasts advanced features and quality embedded into a streamlined operation.

The PureLink HTR Tx/Rx HDMI, RS-232, IR, ARC & Ethernet Extender over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.

The PureLink HTE Tx/Rx 4K HDMI over HDBaseT Extension System with POE extends an HDMI signal with embedded audio up to 330ft at a 4Kx2K resolution. It uses a single, economical CATx cable. Included are IR and RS-232 bi-directional control support.

The PureLink HTR Rx HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.

The PureLink HTR Tx HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.

The PureLink HTE Rx 4K HDMI over HDBaseT Receiver extends an HDMI signal with embedded audio up to 330ft at a 4Kx2K resolution. It uses a single, economical CATx cable. Included are IR and RS-232 bi-directional control support.

The PureLink HTE Tx 4K HDMI over HDBaseT Transmitter extends an HDMI signal with embedded audio up to 330ft at a 4Kx2K resolution. It uses a single, economical CATx cable. Included are IR and RS-232 bi-directional control support.

9×9 4K UHD Seamless HDMI Matrix Switcher

The BG-4K-VP99PRO is a highly versatile HDMI matrix switcher/video wall processor/ multiviewer, perfect for professional AV installations. Offering exceptional connectivity with 9 HDMI inputs, outputs, and loopouts, it extends HDMI signals up to 70 meters over CAT5. With support for resolutions up to 4K60Hz 4:4:4 and advanced video processing, it enables seamless switching between video sources, 3x3 video wall creation, and the display of up to 9 sources on one screen. Balanced audio extraction and multiple control options ensure an immersive experience, making it ideal for presentations and conferences. This award-winning product offers a future-proof design with HDCP compliance and firmware updates via a micro-USB port, making it a comprehensive solution for professional AV setups.

UNPARALLELED CONNECTIVITY AND QUALITY

The BG-4K-VP99PRO offers an impressive array of connectivity options to cater to your diverse needs. With 9 HDMI inputs, 9 HDMI loop outs, 9 HDMI outputs, and 9 DSC outputs featuring Power over Cable (POC) support, seamless integration with multiple sources, displays, and audio systems is guaranteed. Additionally, for large-scale AV projects and installations, all HDMI sources can be extended up to 70m(229ft) over CAT5/6/7.

Delivering stunning visuals with exceptional clarity and color reproduction, the BG-4K-VP99PRO supports resolutions up to 4K60Hz 4:4:4. Its impressive bandwidth of 18Gbps ensures the smooth transmission of high-quality content.

SEAMLESS CONNECTIVITY AND FUTURE-PROOF DESIGN

Built-in EDID settings optimize communication between your source devices and displays, ensuring a seamless and reliable connection. HDCP 2.2/1.4 compliance guarantees compatibility with a wide range of devices while protecting your content against unauthorized duplication. Stay up-to-date with the latest features and improvements through the convenient micro-USB port, enabling firmware updates and future enhancements. Enjoy precise and visually appealing video wall configurations with screen edge adjustments. Expand your creative possibilities with 180° rotation and mirror functions offered by the BG-4K-VP99PRO.

ADVANCED VIDEO PROCESSING CAPABILITIES

The BG-4K-VP99PRO offers a range of advanced video processing capabilities, including video signal seamless switching, video wall creation, multiview, and preset settings. Seamlessly switch between video sources for uninterrupted viewing experiences. Create captivating video walls with a maximum configuration of 3x3 screens, allowing you to showcase content across a larger canvas. Display up to 9 sources on a single screen. Save and recall your preferred configurations effortlessly with the matrix switcher’s support for preset settings.

IMMERSIVE AUDIO AND USER-FRIENDLY CONTROL

Experience immersive audio alongside stunning visuals with the BG-4K-VP99PRO's balanced audio extraction support. Ideal for professional presentations, conferences, and professional AV installations, this feature ensures a complete sensory experience.

Installation and control are made convenient and flexible with multiple options. Take advantage of panel buttons, IR remote control, TCP/IP control, RS232 commands, and the BG-SWITCH-CONTROL app, a free BZBGEAR proprietary matrix switcher control software for Windows, Mac, iOS, and Android to easily manage and adjust the matrix switcher’s settings to suit your requirements.

HDMI Extender over Single Cat5e / Cat6, 1080P - 60 Meter (197ft)

FireFold's HDMI Extender lets you extend HDMI audio/video signal by up to 60 meters (196 feet) over single Cat5e/Cat6 Cable. The HDMI Extender kit includes both the local transmitter and remote receiver units, perfect for point-to-point digital signage applications that require high quality HDMI™ video. For perfect performance, the extender comes with a EDID function on the transmitter, which enables user to adjust the signal to best match the cable length.

4x2 HDMI Matrix Switch

The 4K HDMI Matrix Switch allows you share up to 4 distinct HDMI with audio, between 2 independent displays or projectors. This matrix switch allows each input and the corresponding audio to be switched individually, meaning that different two A/V sources can be shown on each output, or a single source can be output to two, offering maximum flexibility.

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the DUAL-HDMIWP-EXT wall plate featuring an a built-in amplifier. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With sturdy connectors and support for high-definition resolutions, compatibility is of no concern. The DUAL-HDMIWP-EXT is a user’s go-to solution for long HDMI distances, which can often lose signal after 50 feet. By utilizing the native power over HDMI, this wall plate can boost signals up to 150 feet. These plates can even be daisy-chained for longer runs.

Installing and connecting the DUAL-HDMIWP-EXT wall plate is straightforward and quick. Handy LED lights let you know when everything is working perfectly and when there is a problem. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket. For basic installations, a drywall saw and a screwdriver are the only tools you will need. Just make sure you install the input and output plates in the correct location. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is an issue.

The HDMI 4x4 Matrix with IR Remote Control Extension, 1080p is a true matrix 4 x 4 switch, up to 4 source devices and up to 4 displays can be connected. You can have the same video mirroed on all displays, or use the switch to send different video to each monitor. Input source for each display is selected by pushig button on HDMI matrix box, or using remote control.

** IR Extension function **
IR Extension function allows you to extend remote control IR signal through HDMI cable. Say you have a TV and cable box in the living room, and second TV in the bed room upstairs. You can change cable channel either in the living room or on the bed upstarirs with the cable box remote control. You do not have to go downstairs each time you want to change cable channel.

NOTE: IR remote control adapters are sold separately.